Category Archives: USAWA Daily News

Dale is Again Back

by Dale Friesz

Dale Friesz in action at Art's Birthday Bash performing a 122 pound Ring Fingers Deadlift for a new USAWA Record.

After some 15 months away from the platform, I was finally able to try my hand at Art’s Birthday Meet, October 16th, 2011.  This is the longest period I have gone without training or competitive lifting in the last 31 years.  What I find amusing is I lifted at Art’s with very limited training in the 5 weeks preceding the meet.  I was able to do three singles per workout 2-3 times per week on the two hand finger lifts.  The reason for the finger lifts was that they have been a consistant part of my training since 2005.  During the 15 months after losing my leg I was unable to stand as the stump would not heal and I have 2 injured shoulders thus no bench work.

Since 2000, I have normally had one or more fairly major medical issues each year.  These include joint replacements (hip and shoulder), aorta reconstruction, triple heart by pass, three heart attacks, stent implants in the bypass, two congestive heart failures, implanting of a defibrillator/pace maker, two gastric bleeds, several episodes of MRSA, right leg vein reconstruction and compression surgery, eight vein transplants to establish blood flow in my left leg, the loss of two toes, and then finally the loss of my left leg.  After the loss of the left leg there have been some seven additional surgeries on the left stump so that it would heal.  It is now about 95%.  I have no word on when I will be fitted with a permanent prosthesis.

I am extremely fortunate to have the Doctor I do.  He understands my compulsion to lift weights.  He has also said that the weights are the reason I am still breathing.  Without my wife, my care giver, I would not have made it. 

Al Myers has asked how do you train when you have all this down time?  Prior to the last 15 months I always returned to the all-round basics plus the finger lifts using 3 to 4 sets of one rep on each exercise.  As limited as I now am I am trying to figure out balance on next years national lifts and hope for a prosthesis with ankle flexibility.  I still do the finger lifts!!

Updated Rules Test

by Al Myers

USAWA President Denny Habecker (left) and the late Wilf Chapman (right) of Australia officiating at the 2007 IAWA World Championships in New Zealand.

I just want to announce that the USAWA Rules Test has been updated. The USAWA Official’s Director Joe Garcia and myself have made a few changes to the Open Book Rules Test that must be passed in order to become an USAWA Certified Official. Joe had identified some “bad questions” on the old exam and these questions  have been changed or modified.  Now I’m not saying we made the test easier – because a few new “hard” questions were added as well.  From this point on, this new test must be the one taken.  Don’t fill out and send in the old test!  If you do, you will be asked to take this new one instead. So this is YOUR WARNING!!!!!  Also, due to some rule changes in the past couple of years, the answers to some questions have changed. This new test is much improved, with very few “open ended” questions. 

There are actually rules for the Rules Test.  Since there are no questions covering these rules of the Rules Test in the Rules Test (wow, say that three times quick!), I’m going to go over them.  This is taken from Section VII of the USAWA Rule Book as it applies to the Rules Test:

10.   There will be two levels of classification for Certified USAWA officials.

  • Level 1 Test Qualified – The official has passed the USAWA Rules Test.
  • Level 1 Experience Qualified – The official has the experience of officiating in 25 or more competitions or events.
  • Level 2 – The official has passed the USAWA Rules Test and has the experience of officiating in 25 or more competitions or events.  

11.   The USAWA Secretary will maintain a list of certified officials, their level of classification, and their active/inactive status. This list will be available to the membership.

12.   The USAWA Rules Test will consist of 100 open book questions regarding rules within this rulebook.  The test must be completed and returned to the Officials Director to be judged.  There is no time limit in taking the test. To pass the test, an applicant must score over 90 percent.  The Officials Director will inform you only of a pass or fail.  You will not be told the questions you missed. If you fail, you may retake the test as many times as you like.  Once an applicant has passed the test, the Officials Director will inform the USAWA Secretary to include you on the list of Certified USAWA Officials.

13.  Once an official has passed the Rules Test, the Officials Director will issue an Officials card that will be valid for 3 years from the date the official passed the test.  Level 1 Test Qualified Officials will be required to retake the Rules Test after 3 years to maintain Certified Official Status. Level 1 Experience Qualified Officials will receive an Officials card that is valid for 3 years and will be automatically renewed unless the official has been inactive as an official during the previous three year period, in which a new Officials Card will not be issued unless the individual makes a written request to the Officials Director. Level 2 Officials are exempt from recertification, and are issued a lifetime officials card.

14.   An individual must make a written request to the Officials Director in order to apply for Level 1 Experience Qualified Certified Status and provide proof that the individual has the 25 competition experience requirement. This also applies to an official who wants to change their level of certification from Level 1 Test Qualified to Level 2.  

 In a couple of years  (2013) we will begin to have a few officials that will need to renew their certification.  Joe and I have discussed this, and we have decided that we will work up a new test in a year from now.  This way those re-certifying will have a new and different test to take.  I’m sure some questions will remain the same or just be changed slightly.  I KNOW  myself  (and Joe) will hear some complaining and bellyaching when this happens, but THAT IS JUST THE WAY IT IS in order to have a good officials program.  Our officials program already lets the “experienced” officials “off the hook” when it comes to taking the Rules Test.  That is why there is that “25 event” loophole in the rules now.   My opinion is that EVERYONE should be taking the test and this is why – we have over 200 official lifts in the USAWA, and the rules are being changed and amended every year now, plus new lifts are being added.  Even the experienced officials have to “stay on top of things” in order to be a good official.   The main reason of the Rules Test is to insure that the officials are familiar with the current USAWA Rulebook.   All the questions on the test can be “looked up” and answered, since it is an open book exam.  This process FORCES someone to at least know where to look for the answers to judging questions or where the individual lifts rules are located in the Rulebook.  Since I’m on a “soapbox” right now, let me tell you about another gripe I have with officiating (besides the USAWA and IAWA(UK)  rules differences).  First of all, wrong calls on lifts will always be made by officials.  I even see it watching NFL games with instant replay, and these guys are paid “big bucks” to be professional officials.  Making a bad call doesn’t bother me – and I believe the officiating is as good in the USAWA as it ever has been.  Judgement calls are judgement calls – and everyone sees things differently. What bothers me is when “experienced officials” really don’t even KNOW THE RULES.  That is inexcusable.  All you have to do is have a rulebook and READ THE RULE of the upcoming lift before sitting in the chair.  I watch outstanding seasoned officials like Denny Habecker and this never happens to him, and this is why.  He is always carrying his Rulebook with him when officiating  and reads over the rules for the upcoming lift (which he probably knows like the knurling on his favorite bar) just TO BE SURE he hasn’t forgot something.  That’s what it takes to be an outstanding official!!!

This new Rules Test is located on the website under “USAWA Information – Officials & Rules Test” .

Vertical Bar Deadlift, 2 Bars, 2″

by Al Myers

Longtime USAWA member and IAWA supporter John McKean performs a 283 pound Vertical Bar Deadlift - 2 Bars, 2" at the 2010 USAWA Club Challenge in Ambridge, PA.

One of the lifts that will be contested at this year’s World Championships in Perth, Australia will be the Vertical Bar Deadlift, 2 Bars, 2″.  This a very difficult grip lift that requires grip strength in BOTH HANDS.  If one of your hands is weaker than the other, this lift will show it!   I have done this lift in several USAWA competitions to date, but never in an IAWA competition.  This event was contested at the 2003 USAWA National Championships in Youngstown, Ohio. 

A while back  I received a question regarding this lift which I thought was an EXCELLENT QUESTION, so I would like share this question and my response since I’m sure other lifters might be wondering the same thing.

QUESTION: I wonder if you could help me out with some lifting technique!?  It is with reference to the 2 x 2″ vertical bar lift for Australia – I had a go at this lift on friday night, I attempted it with one bar at either side of my legs and found the weight plates were catching my legs all the way up!!! Is the straddle stance, i.e. one pin in front and one pin behind a legal position? Also is it mechanically better?  Thanks for the help.

First, lets do a review of the rules for this lift.  By now most of you know my frustrations with the nuances of rule differences between the USAWA rules and the IAWA rules for lifts.  Well, this lift is no exception to that as you will see. (By the way, both of these rule descriptions are actually for the same lift!  It doesn’t appear that way when you read them. )  Even the names are drastically different – the USAWA calls it a deadlift while the IAWA rules just call it a lift.

USAWA Rules for the Vertical Bar Deadlift, 2 Bars, 2″

I25.  Vertical Bar Deadlift – 2 Bars, 2”

The rules of the Vertical Bar Deadlift – 2 Bars, 1” apply except two 2” inch diameter Vertical Bars are used.

Need to reference this rule –

I24.  Vertical Bar Deadlift – 2 Bars, 1”

The setup for this lift requires two Vertical Bars, which is a bar of one inch diameter with a maximum length of 18 inches. A collar or plate must be tightly fastened or welded to the bottom so plates may be added to the bars. Both vertical bars must be loaded to the same weight.   No knurling is allowed on the bars. The lifter must start with the bars on each side of the lifter. Width of feet placement is optional, but the feet must be parallel and in line with the torso. Feet must not move during the lift, but the heels and toes may rise. Each bar may be gripped by any grip near the top of the Vertical Bars. The forearms are not allowed to touch the bars. The lifting hands or weight may accidentally touch the lifter’s body or legs during the lift, provided that it does not aid in the lift. The lift begins at the lifter’s discretion. The body must then straighten, lifting the Vertical Bars from the platform. The legs must be straight and knees locked and the body upright at the completion of the lift. Any rotation of the bars must be completely stopped. Once the weight is motionless, an official will give a command to end the lift.

IAWA Rules for the Two Vertical Bars (one in each hand) – 2 inch rods

F26.  TWO VERTICAL BARS (ONE IN EACH HAND) – 2 INCH RODS

The rules of performance are the same as for the vertical bar lift, except that the lift is performed with  two x 2 inch diameter bars / rods, one in each hand.

Causes for Failure: 

1. Causes for failure are the same as for the vertical bar lift, except that 2 x 2 inch rods are used.

Need to reference this rule –

F19. VERTICAL BAR LIFT – TWO INCH ROD 

The rules of performance are the same as for the vertical bar lift, except that the lift is performed with a two inch diameter bar / rod.

Causes for Failure: 

1.  Causes for failure are the same as for the one hand vertical  lift, except that a 2 inch rod is used.

Need to reference this rule as well –

F2.   ONE HAND VERTICAL BAR LIFT

The lifter will grip a vertical bar with one hand, and lift the bar and weight stack clear of the lifting surface, holding it motionless and under control for two seconds. On completion the legs should be erect and straight with the free hand clear of any contact with the body. The bar will be of 1 inch diameter, and can be up to 30 inches long. A collar or base plate should be tightened or welded  on the bottom to hold the vertical weight stack. The bar should not be knurled. The lifter can use an optional grip, and the lifting hand should not be in contact with or in close proximity to the weight stack, so as to avoid any tipping  or gripping of the bar  with the weight stack at an angle. The lifter should also be careful to ensure that the bar does not touch the forearm or leg, and the lifting hand is not locked against the thigh.

Causes for Failure:

1.   Any contact of the bar with the forearm or legs, or locking of the lifting hand or bar against the thigh.
2.  Any contact between the lifting hand and the weight stack, or any attempt to tip or grip the bar at an angle.
3.  Failure to achieve and maintain the finished position (weight held clear of the lifting surface, motionless and under control for two seconds, with the legs erect and straight and the free hand clear of any contact with the body.
4.  Replacing / lowering the bar before the referees signal.

Wow!  That is confusing – isn’t it???  Now add in the factor that the World Entry form, in it’s attached list of guidelines for the rules of the lifts to be contested,  has this lift misnamed as the 2 HANDS FULTON DUMBELLS DEADLIFT (I’m sure this is was just listed this way on accident),  but you can see why someone would have questions regarding this lift!  Add in the differences in rules between the USAWA and the IAWA and  it makes it nearly impossible for me to answer some parts of the question as well.

Is the straddle stance legal? 

The USAWA rules state that it IS NOT (the bars must be on each side of the lifter).  The IAWA rules don’t state that is an infraction (nothing is mentioned regarding the lifter’s stance) , so I  can assume that a straddle stance is allowed.  Now to the part about it being a mechanically advantage to use the straddle stance – I have tried it both ways and I prefer the side by side approach. It seems to me that my grip is dramatically reduced when holding one of  the VBs to the back, and since this event is limited by my grip and not my back strength, this reduces the amount I can lift. 

What are some other rules differences between the USAWA and the IAWA?

The big one that “jumps out” to me is the legal length  allowed.  The USAWA rules clearly state the VBs can not be over 18 inches in length while the IAWA rules allow a length of up to 30 inches long!  This is a HUGE difference!  Having  a VB  that long turns this lift into a partial lift.  For some short lifters, the VB may barely even clear the floor at lockout!   The USAWA rules require the lifter to stand totally upright with shoulders back (that is why it is called a deadlift in the USAWA rules) while the IAWA rules only require, as stated in the rules “to lift the bar and weight stack clear of the lifting surface”, thus I would say is why it is just called a lift. Nothing is stated in the IAWA rules about being required to stand upright (but I won’t be surprised that this will be required come meet day, and be justified with the explanation that standing upright was implied).   Here’s another question – my left hand strength on a VB is slightly less than my right hand, so can I load the VBs to different weights?   The USAWA rules clearly state NO on this – but this is not stated as an infraction in the IAWA rules so I’m going to assume I can do this (but then again I bet come meet day this will also not be allowed, with the explanation that this is ANOTHER  implied IAWA rule on this lift).  With these rule differences it appears to me that the USAWA rules are much more difficult than the IAWA rules for this SAME LIFT.  There is one rule issue that might make the IAWA rules a little more difficult than the USAWA rules as they state the weight must be  “motionless and under control for two seconds” whereas the USAWA rules only require the VBs to be held till “the weight is motionless”.  Two seconds is a long time to hold at lockout after becoming motionless, and will definitely decrease the amount of weight that can be lifted versus getting the down command immediately when the VBs are motionless. 

Neither set of rules state limitations on the size of plates that can be loaded onto the Vertical Bars. When lifting the VBs at your side, large plates (45#s or 20Ks) will hit the side of your legs and cause drag, and in turn less weight can be lifted. I prefer loading the VBs with smaller plates(25#s or 10Ks) when performing this lift.  Hopefully this will be the way the Vertical Bars will be loaded in Australia.

I have stated my opinion on rules many times before but I’m going to repeat it.  I don’t really care WHAT the rules are for a lift as long as the rules are well written and are specific in what is allowed and disallowed.  NOTHING SHOULD BE IMPLIED WHEN IT COMES TO THE RULE BOOK.  

It also would be nice if the USAWA and the IAWA had consistent rules in all of the lifts.  We are far from that now. But if at Worlds, the Vertical Bars are 30 inches long and only need to clear the floor a 1/2″ to be a legal lift, I will adapt to that and do it that way!

The Secret to my Strength

by Thom Van Vleck

My lovely wife, Kelly, serving up cake at the USAWA Nationals hosted by the JWC. She is the icing on my cake!

I have a secret to my strength, however much of it I have, and I owe it to someone special in my life.  It has nothing to do with secret supplements, or special workout routines, or coaching I have received,  but everything to do with the source of my motivation to be successful in life.  It’s my wife.  And since we are celebrating our 21st Anniversary this week (and more importantly to me the 25th Anniversary of our first date and the “real” first day or our life journey!!!!) I wanted to give her the credit she deserves.

My awesome wife, Kelly, by my side. She not only makes me feel younger but I even look younger.

Like a lot of us, we have a wife that puts up with what we do.  Some are more supportive than others.  I have admired some of the older guys in the USAWA and their how their wives seem to support what they do, like Dennis Mitchell and Denny Habecker. My wife takes care of a lot of the “behind the scenes” things at the numerous meets I run and I’m lucky to have someone who understands that my training is part of who I am and without it, I’m much less of a man.  I really need it to stay balanced and focused and my wife let’s me do that.

So, thanks for letting me give credit to someone who had been there by my side for 25 years….but let’s all take some time to thank those who help us out and let us do the things we love to do!   A solid partner in life is maybe the most important ingredient to success.  Thanks Kelly, for choosing to be mine!

Ramblin’

by Al Myers

One of my favorite sections of Bill Clark’s old Strength Journals was his “Ramblin” commentaries.  These often went “on and on”  about any significant or insignificant activity within the USAWA, or just his general viewpoints regarding an issue pertinent at the time.   So pretty much, Bill just rambled on about anything and everything, thus the name of the section – Rambin’.   Well, I’m no Bill Clark, but I got several things to announce or comment on today so I will be Ramblin’ a bit myself. 

First of all,  I want to wish Jarrod Fobes the best  of luck for his meet in Denver, Colorado on Saturday.  The meet is named “The Welcome Mat Meet” and will be Jarrod’s first promotion within the USAWA.  I really wanted to be there, and made plans to do so, but a family issue has interfered with my travel plans so I will be staying home dealing with that instead.  I believe this will be the FIRST EVER USAWA meet or event sanctioned in the State of Colorado.  I will need to do some checking to see for sure, but I don’t ever remember a meet in Colorado.  (If any of you “oldtimers” remember one please let me know.)  Of course, the most famous Colorado USAWA lifter is Rex Monahan.  Rex was a mainstay in major competitions for many years.  There is rarely a major meet where the conversation doesn’t turn to Rex, and a story or two is told in his remembrance.   But I don’t think Rex ever put on a USAWA meet in Colorado???? I can’t forget mentioning the Backbreaker this weekend as well.  This meet has been a mainstay at Clarks Gym for many years, and emphasizes all the heavy lifts – the Back, Hip, H&T, Neck, and Harness.  If you get a chance to make this meet on Sunday – DO IT!  More than likely you will get to meet up with the Heavy Lift PHENOMS Steve Schmidt and Joe Garcia, and they will very nicely give you the BEAT DOWN!

Before I forget, I want to congratulate  Jarrod for passing his USAWA officials test.  His name is now added to the list of Certified USAWA Officials.   This list is getting “longer and longer” and the USAWA Officials Program is growing.  I am glad we n0w have an Officials Program in the USAWA, after going many years without one.  I know the critics will always say that “passing a test doesn’t make a good official”, and I’m not going to argue that point.  But passing a test does do TWO THINGS that we didn’t have before: number 1, insures that an official has at least looked at the USAWA Rulebook once in their life, and point number 2, shows that the official at least cares enough to put a little time into taking the test to  become certified.   I don’t think we are asking too much!!!  Plus, every year I know we will do things to “strengthen” the officials program.  Last year at the National Meeting it was passed that an USAWA Official must also be a current member of the USAWA to be active.  Again, that is NOT TO MUCH TO ASK, but it is a small step forward.

BTW – the USAWA Online Store is making sales!   I just sent out a big order yesterday to Jim Malloy.   Thanks Jim for your order!  Jim has been a HUGE SUPPORTER of the USAWA for many, many years.   He always keeps his membership up to date and has supported practically every thing the USAWA has done.  Before I know it I will need to be ordering more merchandise.   Also, our inventory stock is very limited and it is VERY LIKELY that certain sizes of shirts will be sold out before I restock.   I will list this on the store item blog site as it happens.  PLEASE CHECK THIS before ordering items that may be out of stock.  Also, if anyone has ideas for other online store items just let me know and I’ll consider it (unless someone wants something silly, like say, USAWA labeled beer!). 

The IAWA World Championships in Perth, Australia is getting closer!  It looks like the USAWA will have a good representation of competitors present.  Besides myself and Chad Ullom, I know that Denny Habecker, Art Montini, and Dennis & Flossy Mitchell will be making the trip.   I don’t know of any other USAWA lifters that are going, and if you are, please let me know.  Come to think of it – this is the SAME GROUP that made it to the IAWA Championships in Glasgow last year!  Best of luck to all competitors and safe travels. 

I better call it quits before this gets too long.  After all, Bill usually kept his “ramblins” to only a page in the ole Journal!

1 … 316 317 318 319 320 … 457