Category Archives: USAWA Daily News

TEAM LIFTING

by Al Myers

The date for the USAWA Team Nationals is approaching fast (Next Weekend -Sunday, September 20th, 2009). Team lifting is when two individuals (the Team) perform a lift together. The USAWA provides divisions for 2-Man, 2-Person, and 2-Woman Teams. A 2-person team is a team made up of a male and a female. All of these divisions are contested at the National Team Championships.

My training partner Chad Ullom (to left) and myself training the 2-Man Zercher Lift in preparation for the 2007 Team Nationals. We ended up lifting 705 pounds at Nationals.

Rules for Team Lifts (taken from the USAWA Rulebook)

“Any approved lift may be done as a Team Lift, provided it is done according to the rules of the individual lift. Team Lifts consist of two lifters performing a lift together. This may consist of male-male, female-female, or female-male teams. The combination of lifters may be of any age or weight. The weight class the Team will be in will be that of the heaviest lifter and the age class that of the youngest lifter. An exception is if a Junior lifter is teamed with an Open or Master lifter, in which the age class will be the class of the older lifter. “

Team lifting is very challenging because factors come into play that when lifting on a bar by yourself you don’t experience. The timing of the lift with your partner has to be the same or imbalances occur. It helps if both lifters are of the same height and body type so the bar is at the same height during and at the finish of the lift. Flexibility becomes more of a factor because of the limited space a bar provides when two lifters have a hold of it!! Lifting styles also come into play. For example – when doing a clean, one lifter can’t squat clean the bar while the other power cleans it!! Another factor you don’t think of until you actually do Team Lifting is trust. A missed lift can be catastrophic in team lifting because one person may be successfully completing the lift when this happens and unaware that one side of the bar is dropping fast!!! You have to know each others capabilities and be able to TRUST that your lifting partner won’t let you down.

But at the same time, Team Lifting provides a great challenge. In some lifts you can actually lift more together than the sum of each of your individual lifts. Chad and I found this out a couple of years ago when the Team One Arm Deadlift was contested at Team Nationals. We had an idea of what we thought we could do together based on each of our individual One Arm Deadlifts – but forgot a big difference that was going to occur when we were both gripping the bar. That difference was we were able to create an “alternate grip” on the bar by facing away from each other, thus helping in blocking the “bar roll” that occurs in any one arm deadlift. We ended up lifting more together than the sum of our “Bests” at the time.

There is still time to enter the USAWA Team Nationals.

John Grimek and the One Arm Dumbbell Swing

by Al Myers

John Grimek performing an One Arm Dumbbell Swing.

I can’t finish the story on the One Arm Dumbbell Swing without mentioning John Grimek.  As most All-Rounders know, John Grimek has had a tremendous influence on the USAWA.  He is one of the very few USAWA Hall of Fame members who didn’t earn his way into the USAWA Hall of Fame by competing in USAWA competitions.  He got nominated and inducted with the first USAWA Hall of Fame Class in 1993 because of the way he trained, how he promoted odd lifting (or all-round lifting as it is known today), and the great respect all-round lifters have for him.

Most lifters know John Grimek the bodybuilder.  After all, he is the only man to ever win two AAU Mr. America titles (1940 and 1941).  He had the “perfect physique” and was way ahead of his time in bodybuilding. He also won the Mr. Universe title in 1948 and the Mr. USA title in 1949.

Most lifters know John Grimek the weightlifter. After all, he was a National Weightlifting Champion and member of the famous Olympic Weightlifting Team that competed in Berlin in 1936.

But I argue he was foremost an All-Round Weightlifter!!!  His training program consisted, as he put it, of using “1001 exercises” to not only increase muscle size and strength, but flexibility and athleticism as well. He excelled at one arm lifts like the bent press, one arm snatch, side press, and the one arm dumbbell swing.  He even did support lifts like the Harness Lift and Hip Lift. He was also a great gymnast – and often did handstand pushups with ease.  But this is not intended to be an autobiography of John Grimek – I don’t have enough space for that –  instead just an article showing his great ability in the One Arm Dumbbell Swing. I was hoping that I could find proof that John Grimek had done a Swing that would have put him into the Top Ten of All-Time.  I have read that he did swings with over 200 pounds in training – but I couldn’t substantiate them.   An article by one of his training partners, Gord Venables in 1943,  stated that he and Grimek had both done 175 pounds in the One Arm Dumbbell Swing in training.

I ran across this old YouTube Video showing John Grimek doing some lifting and posing at a weightlifting picnic at York around the year 1940.  The quality of the video is not the best – but it clearly shows what a great lifter and performer John Grimek was!!

John Grimek died on November 20th, 1998.

Top Ten ALL-TIME One Arm Dumbbell Swing

by Al Myers

It is a difficult task to try to come up with an All-Time Top Ten list for any lift, and the One Arm Dumbbell Swing is even more difficult than others. I used many resources in formulating this list and want to state that I have tried my best to make this list as accurate as possible but I know that the list is not perfect.  Several factors made this research difficult.  Were the lifts official or unofficial?  Was a dumbbell used or a Kettlebell used?  Was the lift actually an One Arm Swing or was it an One Arm Dumbbell Snatch?  I want to thank everyone on the Iron History Forum for helping me with this project –  their knowledge on lifting history far exceeds mine!!!

TOP TEN PERFORMANCES ALL-TIME
THE ONE ARM DUMBBELL SWING

Rank Pounds         Lifter                                                           Date
1. 220
Hermann Goerner  (Germany)
1920
2. 219
Charles Rigoulot  (France)
1932
3. 202
Maurice Deriaz  (Switzerland)
1912
4. 199
Jean Francois LeBreton  (France)
1907
5. 198
Ernest Cadine  (France)
1925
6. 194
Emile Deriaz  (Switzerland)
1904
7. 190
Ron Walker  (England)
1937
8. 187
Arthur Saxon (Germany)
1905
9. 178
Stan Kratkowski  (United States)
1934
10. 176
Gabriel Lassortesse (France)
1907

As you can see from this list – all the top ten lifts of ALL-TIME in the One Arm Dumbbell Swing happened before the year 1937.  The swing is definitely a “forgotten lift”.  As I said the other day, one arm lifts were often contested in lifting competitions in the early 1900’s.  Today, the only opportunity to do an One Arm lift is in an All-Round weightlifting competition.  And given the large number of All-Round lifts – the chance to do an One Arm Swing in competition does not come around that often.  It takes extra time to load a swing dumbbell during competition which leads Meet Directors in not selecting the One Arm Dumbbell swing for a competition lift.

Steve Angell, in an IAWA competition, did an One Arm Swing with 165 pounds.  Rick Meldon, weighing only 160 pounds, did an One Arm Swing with 172 pounds in an IAWA event – the highest over bodyweight One Arm Swing ever in competition!!!

History of the One Arm Dumbbell Swing

by Al Myers

Chad Ullom has the Top One Arm Dumbbell Swing ever done in the USAWA with a lift of 143 pounds. This was accomplished at the 2007 IAWA World Championships in New Zealand.

The One Arm (or one-hand as it was originally known as) Dumbbell Swing has been contested in weightlifting competitions as far back as the late 1800’s.  In the early days, One Arm Swings were often done with Kettlebells. The USAWA rules only allow the use of dumbbells today.

There were originally two basic styles of One Arm Swings – the Classic French Style and the British Style.  The French Style was the technique used first in the late 1800’s to early 1930’s, whereas the British Style became more popular after 1920.  The differences between the two styles are significant. The French Style used equally loaded, balanced dumbbells and when swung overhead used a straight arm throughout. The British Style allowed the use of “Backhang” and the bending of the lifting arm.

Backhang is allowed by the USAWA Rules when doing Swings. What is Backhang? Backhang is the unequal loading of a dumbbell where more weight is put on the back end of the dumbbell prior to the lift. The USAWA rules allow backhang up to 10 kilograms or 22 pounds.  Several of the old time strongmen would use backhang up to 40 pounds!! Once you master the technique using  Backhang, it is possible to lift more in the One Arm Swing than with an equally loaded dumbbell.


Single-handed Dumbbell Swing

by Arthur Saxon

Arthur Saxon perfoming a One Arm Dumbbell Swing

The muscles called into play are practically the same here as in the one-handed snatch , but the bell must be placed on end between the feet as shown in illustration. Keep the head down, then, with a perfectly straight arm, pull up, using a combination of muscular efforts and concentration as described in the snatch lift. Lean back and watch the dumbbell with your eyes, and when it is at a suitable height suddenly dip beneath same and twist your wrist violently, so that you may place a straight arm beneath the bell.

Credit: The Development of Physical Power by Arthur Saxon

1 321 322 323 324 325 332