Rules for the Deadlift – Fulton Bar, Ciavattone Grip
by Al Myers
This will be the third and final lift in the USAWA Grip Championships. It is a lift that has been contested often in the USAWA, and has been part of past Grip Championships. This lift was also a lift in the 2011 IAWA World Championships in Australia. The USAWA Rules for the Deadlift – Fulton Bar, Ciavattone Grip is:
F7. Deadlift – Fulton Bar, Ciavattone Grip
The rules of the Deadlift – Ciavattone Grip apply except a Fulton Bar is used.
B3. Deadlift – Ciavattone Grip
The rules of the Deadlift apply except a Ciavattone Grip must be used. A Ciavattone Grip is an overhand grip in which the palms of both hands are facing the lifter. No hooking of the thumb and fingers is allowed.
I was having a facebook discussion the other day with a good friend from Scotland, Andy Tomlin. We were discussing this lift, and it was pretty clear that we were having a “language barrier” in our conversation. The reason for this was the difference in nomenclature in how this lift is named in the USAWA vs. the IAWA(UK). I have a difficult time understanding Andy when we are visiting “face to face”, but add in different names for things and corresponding through internet messaging, and things get really confusing. I’ve been over this before in prior blogs on this lift, but I think some defining of terms are still in order.
First of all, the USAWA defines the 2 inch bar as the Fulton Bar whereas the IAWA(UK) uses this term for two bar lifts only – the Two Hands Fulton Deadlift and the One Hand Fulton Barbell Deadlift. The USAWA Rulebook, in Section VI. 23., gives this definition of the Fulton Bar:
23. The Fulton Bar (2” Bar) must meet the following specifications.
- The diameter of the bar must be a minimum of 1 15/16 inches.
- The bar may be a pipe or a solid steel shaft.
- There must be no rotation to the sleeves of the bar.
- The minimum distance between the inside collars is 51 inches.
- The maximum distance between the inside collars is 58 inches.
- The minimum total length must not be less than 7 feet.
- There must not be any knurling on the bar.
- The weight of the bar must be clearly marked.
- The bar must be straight
This means in the USAWA any official lift in which the Fulton Bar is used, the Fulton Bar name is used in its naming. This is not the case with the IAWA(UK) rules however. An example would be a simple snatch using a bar that meets the above specs, the USAWA would have the lift named “Snatch – Fulton Bar” where the IAWA(UK) name would be “Two Hands Snatch – 2 Inch Bar”. Now back to the Deadlift – Fulton Bar, Ciavattone Grip and the Deadlift – Fulton Bar and the difference in names between the USAWA and the IAWA(UK). This chart compares the difference in naming:
|USAWA NAME||IAWA(UK) NAME|
|Deadlift – Fulton Bar, Ciavattone Grip||Two Hands Fulton Deadlift|
|Deadlift – Fulton Bar||Two Hands Deadlift – 2 Inch Bar|
The USAWA lift Deadlift – Fulton Bar and the IAWA(UK) lift Two Hands Deadlift – 2 Inch Bar is the same lift, which allows the use of an alternate grip on the bar vs. The Deadlift – Fulton Bar, Ciavattone Grip and the Two Hands Fulton Deadlift require an overgrip on the bar, with knuckles facing away from the lifter. But there’s more!!!! There is ONE rule difference for this lift! The USAWA defines that this lift be done with a Ciavattone Grip. The Ciavattone Grip is defined in the glossary of the USAWA Rulebook as:
Ciavattone Grip – This is a grip where the knuckles are facing away from the lifter, and the palms are facing the lifter. The thumbs and fingers must not be hooked in any manner.
The IAWA(UK) does not recognize this definition in their rulebook for multiple different lifts. The use of Ciavattone is limited to the naming of just two IAWA(UK) lifts – the Two Hands Ciavattone Deadlift and the One Hand Ciavattone Deadlift. Both of these lifts require the same criteria as the USAWA – namely overhand grip and NO HOOK! However, this does NOT apply to the IAWA(UK) Two Hands Fulton Deadlift. Under the IAWA(UK) rules this lift can be hooked,whereas under USAWA rules it CAN NOT. Does this affect very many lifters? Probably not – but for guys that got fingers long enough to hook a 2″ bar it can make a huge difference!