Author Archives: Al Myers

Vertical Bar Deadlift – 1 bar, 2″, 1 hand

by Al Myers

Ben Edwards doing a 235 pound Vertical Bar Deadlift - 1 Bar, 2", One Hand. This is the top All-Time record in the USAWA.

This lift was introduced to the USAWA several years ago by John McKean of the Ambridge Barbell Club.  Initially it was performed with a 2″ Vertical Bar in each hand, with the lifter completing the lift by standing up with the weight like a normal deadlift.  The first recorded meet this lift was done in was 1998, at Art’s Birthday Bash.  John McKean first introduced it as a One Hand Lift in 2003 at the Jump Stretch Record Day. Since then the popularity of the 2″ One Handed VB Lift has grown. The first big meet it was held in was the 2004 National Championships, in Youngstown, Ohio.  The Vertical Bar has a length limit of 18 inches.  The reason this became the USAWA standard length was because the original VB was the sleeve off of an Olympic Bar, measuring just under 18 inches.  The USAWA rules on Vertical Bar lifting are quite different than other grip competitions. The big thing to remember is the bar must become completely motionless at the completion of the lift, including any rotation.  Another USAWA rule I want to clarify is that in any One Handed lift the same hand must be used throughout all of your attempts. You can’t save “thy strong hand” for “thy hard lift”.

Rules for the Vertical Bar Deadlift

H18.  Vertical Bar Deadlift – 1 Bar, 1”, One Hand

The setup for this lift requires a Vertical Bar, which is a bar of one inch diameter with a maximum length of 18 inches. A collar or plate must be tightly fastened or welded to the bottom so plates may be added to the bar.  No knurling is allowed on the bar. The lifter may straddle the weight or have it placed to the lifter’s side. Width of feet placement is optional, but the feet must be in line with the torso. Feet must not move during the lift, but the heels and toes may rise. The bar may be gripped by any grip with only one hand near the top of the vertical bar.  The forearm is not allowed to touch the bar. The lifting hand must not touch the body during the lift, but the weight may accidentally touch the legs provided it does not aid in the lift. The non-lifting hand may be braced on the leg or body during the lift, but must be free from the body at the completion of the lift. The lift begins at the lifter’s discretion. The body must then straighten, lifting the Vertical Bar from the

platform. The legs must be straight and knees locked at the completion of the lift, but the shoulders and body do not need to be erect. The lifting hand must be above the level of mid-thighs at the completion of the lift. Any rotation of the bar must be completely stopped. Once the weight is motionless, an official will give a command to end the lift.

H19.  Vertical Bar Deadlift -1 Bar, 2”, One Hand

The rules of the Vertical Bar Deadlift – 1Bar, 1”, One Hand apply except a two inch diameter Vertical Bar is used.

The Deadlift – 2 Inch Dumbbells

by Al Myers

Matt Graham performing a deadlift with an Inch Dumbbell Replica in EACH HAND at the 2005 Dino Gym Challenge. Will this be matched at the Grip Challenge this coming weekend?

The name of this lift is slightly misleading.  At first glance, one might think that “2 Inch” refers  to one dumbbell with a 2″ diameter handle.  But what it really refers to is TWO dumbbells that have handle diameters the same as the famous Thomas Inch Dumbbell. This lift was introduced to the USAWA at the 2005 Dino Gym Challenge.  Several years ago IronMind Enterprises sold an Inch Dumbbell Replica. This replica dumbbell had a handle diameter of 2.47″ and weighed 172 pounds, with spherical iron heads.  The handle is smooth (no knurling).   Anyone who can pick up the Inch Dumbbell with only one hand has WORLD CLASS grip.  The Dino Gym has one of these replicas, so come prepared to “Give it a Try”.  I will have the camera ready if anyone actually gets it picked up.

The Rules for the Deadlift – 2 Inch Dumbbells

“The rules of the Deadlift – 2 Dumbbells apply except the dumbbells used must have handles of 2 1/2” in diameter. No knurling is allowed on the handles.  The plates must be firmly attached by collars so no rotation of the plates will occur during the lift. The maximum diameter of the plates used is 11 inches.”

The Deadlift – No Thumb, One Arm

by Al Myers

Ben Edwards, the Dino Grip Challenge Meet Director, set the All-Time Record in the Deadlift - No Thumb, One Arm with a lift of 275 pounds at Clark's Gym Record Day last November.

This week I’m going to run stories describing the lifts that will be in this coming weekend’s Dino Grip Challenge.  Like I said earlier, the USAWA has several lifts that are grip oriented, but not necessary traditional grip events that are held in other grip competitions. All of the events in the Dino Grip Challenge are official USAWA events.  Ben Edwards has picked a good variety of lifts.  The competition will be scored according to USAWA format.  This means that the weight lifted in each event will be added up for total weight lifted, and then adjusted for bodyweight using the Lynch Formula followed by age adjustment.  Age adjustment starts at the age of 40, with 1% being added per year.  There are two divisions in this competition in which awards will be given – under 200 pounds bodyweight and over 200 pounds bodyweight.

Rules for the Deadlift – No Thumb, One Arm

“The rules of the Deadlift – One Arm apply except that the thumb of the lifting hand must not be covering the bar. The thumb may lie alongside and touch the index finger and bar under the bar or be held in the air not touching the bar.  The thumb must not be touching the top of the bar.”

The bar must be raised to a point where both ends of the bar are above knee level, and then held motionless until the lifter receives the down command.  This lift tests the strength of the fingers’ flexor tendons and the ability to hold the fingers in a “locked” position on the bar.  My advice on this lift is to pick your attempts wisely, because this lift goes from being easy to missing the lift by sometimes as little as a 5 pound jump.

History of Past USAWA Officers

by Al Myers

Dale Friesz at the 2009 Heavy Event Nationals

Thanks to the work of the unofficial USAWA Historian Dale Friesz, the website now contains the history of the past officers of the USAWA. Dale has been a very active lifter since the beginning of the USAWA, and has been an integral part of past USAWA National Meetings. Dale deserves a pat on the back from the USAWA for taking time during his vacation to get this project finished. Thanks Dale! Below is the listing of the Past USAWA Officers since the origin of the USAWA in 1987, courtesy of Dale Friesz.

Effective January 1st, 2010 (elected 6/20/2009)

PRESIDENT: Denny Habacker, PA

VICE PRESIDENT: Chad Ullom, KS

SECRETARY/TREASURER: Al Myers, KS

————————————————————-

Effective July 7th, 2007 (elected 7/7/2007)

PRESIDENT: Denny Habecker, PA

VICE PRESIDENT: Al Myers, KS

SECRETARY/TREASURER: Bill Clark, MO

—————————————————————

Effective January 1st, 1993 (elected 11/27/1992)

PRESIDENT: Howard Prechtel, OH

VICE PRESIDENTS: Steve Schmidt, MO

Frank Ciavattone, MA

Art Montini, PA

SECRETARY/TREASURER: Bill Clark, MO

————————————————————–

Effective January 1st, 1989 (elected 1/22/1989)

PRESIDENT: John Vernacchio, PA

VICE PRESIDENT: Art Montini, PA

SECRETARY/TREASURER: Bill Clark, MO

————————————————————–

Effective January 1st, 1987 (appointed 11/29/1986)

PRESIDENT: John Carr, MO

REGISTAR: Joe McCoy, TX

Ben Edwards – Meet Director of the Dino Grip Challenge

by Al Myers

Ben Edwards, of the Dino Gym, FINALLY closes the Dino Gym's OLD #3 COC Gripper. This was one of the very early COC grippers and noticeably much harder than other #3 Grippers. Ben was certified as closing the #3 COC gripper in May of 2005, and has been working on closing this #3 gripper since. He held the handles together for several seconds. He is only the third person to ever close this gripper - and many have tried. Congratulations Ben!!

When Ben Edwards asked me several months ago if he could sanction a USAWA Grip Meet at the gym, I didn’t hesitate in answering YES.  It has been a few years since the USAWA has had a grip  competition on the schedule – with the last one  being the Supergrip Challenge hosted by Kevin Fulton 5 years ago.  The USAWA is loaded with grip events, several of which never get contested in competition.  I really feel the beauty of the USAWA is with the great diversity of lifts – and ANY lifter should be able to find a niche. Meets like this exposes new lifters to the USAWA who might not have otherwise.

Ben has picked a good lineup of lifts – from the Weaver Stick to the Inch Dumbbell Deadlift.  From what I have heard, this meet may have a GREAT turnout.  Ben is still taking entries so get your entry sent in to him!   Over the next week I will be running stories on the lifts that will be contested at the Grip Challenge.

1 … 293 294 295 296 297 … 321