Author Archives: Thom Van Vleck

Breath, Stupid!

by Thom Van Vleck

Thom blowing up a hot water bottle till it burst. We all know Thom is the EXPERT when it comes to breathing, as he is "full of hot air". (photo and caption courtesy of the webmaster)

Recently my Mom returned from the doctor.  She was incredulous about what he had told her.  He had told her she was breathing wrong.  My Mom looked at me and said, “Who wouldn’t know how to breath?”.  I was also watching a kid’s show with my youngest son shortly after that.  One of the characters was depicted as being so stupid that he would periodically forget to breath and would turn blue forcing his companion to remind him to, “Breath, Stupid”!

We all know how to breath, right?  It pretty much comes naturally….doesn’t it?  The devil is in the details.  We may know how to breath, but breathing properly during exercise is important.  I have learned a great deal on this subject over the years and this little article won’t do the subject justice, but maybe it will get you thinking.

First of all, I was taught at a young age to “suck that gut in” and breath with your chest.  I recall at one time watching a video of Jack LaLanne saying just that.  When I was in the military I was constantly told to pull that stomach in and stand up straight.  Also, I was always a little self conscious as I’ve been a little overweight since I as a teenager.  So, “sucking it in” has been drilled in my head.  As a consequence, I have always had trouble getting my “wind” or getting too out of breath when I do something even slightly aerobic.  I never really thought much about it, just assumed I was out of shape and needed to work harder.

Then, one day I was doing some short sprints.  I began to notice that I would hold my breath when I would take off and focus on keeping my stomach super tight.  I then read something about learning to breath with your stomach, not your chest, and I began to work on that.  Believe it or not, it was an article on how to play the trumpet!  All of a sudden, I found I had better “wind”.  In other words, I wasn’t as out of breath when I breathed through my stomach and not my chest.  I also began to take deep breaths using my stomach before exertion, before going out to squat, sprint, or do strongman harness pulls.  Using the stomach to breath deep, full breaths filling my lungs helped me have better “wind”.  It also came in hand with one of my specialty feats of strength….blowing up a hot water bottle!

Second, I began to think about my use of the Valsalva Maneuver.   About ten years ago I had an “Idiopathic Sub-retinal Neo-vascularization” in the retina of my left eye.  Basically, I had a small tear in my retina and a vein grew through it like crab grass in the crack of a sidewalk.  As a result, the “crab grass” had to be zapped with a laser and I lost some vision.  It was called “Idiopathic” because there was no readily apparent cause.  I now suspect it may have been Valsava Retinopathy.  This is when a tear occurs in the retina following pressure buildup likely during the use of the Valsalva Maneuver in lifting.

What is the Valsalva Maneuver?  It’s simply taking and holding a deep breath during exertion or if you want to get technical, a “forcible exhalation against a closed glottis”.  I had done that for years.  When you hold your breath you build up intra-abdominal pressure and in turn solidify your core.  This is a primary reason for using a lifting belt.  You use the belt to push your abdomen against and increase the internal pressure.  The support in the back is really secondary in my book.  There is a theory as to why you get light headed during extended periods of using the Valsalva Maneuver.  It involves the Vagus Nerve that runs by your Carotid Artery.  The idea is that as the blood pressure goes up the Vagus Nerve is stimulated causing you to faint so you pass our before you stroke out!   That’s just a theory.  Personally, I would guess the fact you have stopped breathing has something to do with becoming light headed!  The rapid change in blood pressure could also factor in.  At any rate, this is often what gets blamed, and likely rightfully so in most cases, for deaths when lifters get pinned by a heavy bench press when lifting alone.

So, how are you supposed to breath?  The reality is that if you are doing a max effort for single or low reps you are going to hold your breath at some point and take advantage of the intra-abdominal pressure.  You just can’t avoid it.  However, most “experts” will say to breath out during the concentric part of the lift and in during the eccentric whenever possible.  This is what I’ve tried to do as well with most exercises.  There are some that I do the opposite.   For example, from time to time I mix in some high rep leg presses for a set of 100 or more reps nonstop (I know, real lifters don’t leg press….unless it’s an old school leg press like Ed Zercher used to do).  When I do these I have a lot of compression at the bottom so I breath out on the eccentric (going down), which is the opposite.  I basically breath in the way that keeps the intra-abdominal pressure lowest.

Bottom line:  Think about your breathing during each and every exercise!   Breath deep, through the stomach, not the chest.  Keep that intra-abdominal pressure as low as you can and save it for the big lifts!  By the way, I talked to my Mom’s doctor and he noted she was breathing with her chest, not her stomach and this was creating pressure in her abdomen and with her high blood pressure this was not good.  She is learning how to breath, too!

Multiple Sized Plates

by Thom Van Vleck

The JWC logo, based on a previous drawing by my Uncle Phil over 50 years ago, incorporates a "York" 400lb "hub style" Olympic set.

I have a lot of weights.  I don’t think of myself as a collector, I use everything I have in my gym.  Nothing gets put in a “glass case”.  I have to say that some things I have for practical reasons.  Certain bars work better for Deadlifts, some for Push Presses, some weights just have a “better feel”.   But sometimes I just like the “looks” of something.  I think it goes back to when I was a kid reading all those old Weightlifting mags.  Most of them were basically advertisements for barbells, supplements, and other related stuff being sold by the publisher.  I remember looking at the advertisements and generally you would get these weight sets that had various sized plates and they load them all on the bar for a photo.  Basically, you ended up with what’s in the logo above.  A bar loaded with plates that not only decrease in weight, but in size.  Keen eyes may have noted I actually drew one extra plate on the drawing for the JWC logo….that’s been a long held secret of mine and to date if anyone has noticed, they didn’t say anything.  As far as being an artist….all I know is I know what I like.  When I was drawing that barbell, it just “looked” right to add one last little set on the ends.  Purely aesthetic! 

A York "iron shoe", a Milo DB, and a standard 1" DB, loaded with the "taper" of smaller and smaller plates

Sometimes, when I lift, I want to load up the bar and have that “assortment” on there.  No reason other than it just pleases me!  It is aesthetic which to me always meant that it was cool to look at but doesn’t have any real reason other than that!  I recently bought some 7.5lb, 12.5lb and 20lb solid 1″ barbell plates to go with my 1.25lb, 2.5lb, 5lb, 10lb, and 25lb plates.  Why,  just so I can load them all up and get that “look”.  To me, its a classic look, and it looks cool…….but I do think there is a reason for wanting all those odd little plates on there.

When I first started lifting I was spoiled having all kinds of weights at my disposal since my Uncle’s had quite a collection from the early days of the Jackson Weightlifting Club.  But I recall my Uncle Wayne telling me how they initially had cement weights they had made using buckets and scrap metal for bars.  They had saved up for the York set….a pretty penny in those days!  When they got that first 300lb set it became their goal to put that overhead.  My Uncle Phil told me that Gene Thudium joined the club and at 145lbs of bodyweight, he clean and pressed 165lbs and declared he was going to “lift that whole 300lb” set.  To Gene’s credit, he did do 280lbs at 181lbs in competition….a great lift and had he not been disillusioned when they dropped the clean & press from competition in 1972 I think he would have done it!   My Uncle Wayne recalls the day Thudium walked in the gym and Wayne told him they had dropped that lift.  Thudium, who had been on that mission for a dozen years, threw his hands up, quit, and NEVER came back to the gym!  At any rate, they wanted to lift that whole set which meant all the smaller plates loaded on there.  So, I think there was that challenge of “lifting the whole set” that came along!   As a side note, they ordered a 400lb set and my Uncle Wayne ended up Jerking that out of the rack. 

So, for whatever reason, I like the look and honestly, anything that will motivate me to lift is a good thing in my book.  Even if my wife wonders why I had to order those “odd” sized plates when I have about a 1000lbs of 1″ plates already!

OTSM Championship

It doesn't get any more MANLY than Pro World Champion Dan McKim in his Kilt. Come to the Strength Weekend, put on a kilt and compete in the Games on Saturday, then the Old Time Strongman Championships on Sunday! Dan has competed in Kirksville before and I hope to have him back this year.

by Thom Van Vleck

MEET ANNOUNCEMENT:
OLD TIME STRONGMAN CHAMPIONSHIP

Last year we had our inaugural OTSM Championship at the JWC Training Hall (AKA “Modern Day Torture Chamber” or “My basement”).  I thought it went pretty well and as a result I want to make this an annual event.  The date will be October 14, 2012, with the start time being 10:00am (weigh in’s will happen at 12:00am the morning of the meet or between 9 and 10am before the meet).   The location for the meet will again be the JWC Training Hall.  However, there may be an exception.  Last year we had 10 strongmen show up.  This year if I get enough signed up before hand I plan on returning to the venue we used for the 2011 USAWA Nationals (the old Williard School Gymnasium).   I would say anything over 15 competitors would cause me to have to make that call as my gym was pretty crammed with 10 lifters.  That will be a nice problem to have!  

Now, a quick history lesson.   This event will be held the day after my Scottish Highland Games.  In 1999 when I first started that event I had a strongman contest the next day.  If you competed both days you won an “Iron Man Award”.  I did that for several years and at one point hit 33 competitors for the strongman event!   Then I had a sharp decline and then dropped it until Al Myers and I talked about me holding an OTSM event.  I thought “PERFECT”!  I can bring back the Iron Man weekend!   So, that is why this event will be held on a Sunday and on that date as my Highland Games will be held on October 13th.  Setting dates locally is a real challenge for me due to several big events in Kirksville around that time.  If I held it any other weekend there would be almost NO WAY anyone could get a motel room.  So, that’s why I was limited to that date. 

Since this event is the day after my Highland Games it’s a chance to compete in both!  You know you always wanted to dress up in a kilt!  Now’s your chance!   So sign up for both!  Special Iron Man award for those who survive both days.  This isn’t a “participation award” this is a SURVIVED IT award! 

Now, for the meet information.  I plan on having shirts and awards, plus water and drinks available to the lifters.  I plan on the following events:

Anderson Squat
Cyr Press
Apollons Lift
Bob People’s Deadlift

Lifts will be finalized after Nationals in June after the USAWA Nationals and the annual meeting.  Entry is $25, but if you enter both the Highland Games ($25) and the OTSM you get both entries for $40 (saving $10).   Three attempts per event, total poundage will determine weight class winners.  Overall best lifter will be determined by weight and age formula per USAWA rules.

OTSM entry form – 2012 Old Time Strongman Entry Form

Kirksville Games entry form – 2012 Kirksville Highland Games Entry Form

Contact Thom Van Vleck at tvanvleck@yahoo.com or 660 341 1755 for details.

Tourism Ambassador Award

by Thom Van Vleck

Thom Van Vleck accepting his Ambassador of the Year Award from the Kirksville Chamber of Commerce. (photo courtesy of KTVO)

Thanks to the USAWA, I was greatly honored by the Kirksville Chamber of Commerce the other night.   For the past 15 years I have held dozens of Highland Games, strongman contests, and helped the Irondogs with powerlifting and olympic lifting meets that have brought a lot of people to Kirksville.  I never really thought about it until this award came up, but many would have never come to Kirksville had these events not been held.  To be honest, I just wanted to host meets and have some fun!   My goal financially has always been to break even….and even that goal isn’t always met!  Those of you who have run meets know what I’m talking about!  I never thought about the fact I was bringing tourism to my hometown. 

So why do I want to thank the USAWA?  Because promoting the Nationals in Kirksville last year seems to be the event that got me recognized by the C of C!  Some of you that attended were kind enough to write a thank you letter to the C of C as they helped me out with the meet.   Those letters were so good, they put me up for the award and I won!  There were about 200 of Kirksville’s best at the annual banquet where I got my award.  Debi Boughton, head of tourism for the C of C introduced me, talked of the games and the meets I have promoted, and then read a couple of the letters send by USAWA letters.  The first letter was from Chad Ullom and the second one was from Denny Habecker and his wife.   These letters mentioned business that had several representatives in the crowd.   I gave a little speech, plugged my events for the coming year, and thanked the C of C for helping me as well as the local sponsors who’ve been so good to me over the years. 

Afterwards, I was interviewed by the local paper and the local television station.   I also was asked to speak at the local Rotary clubs (there are two in town) and do an hour long interview at a local radio station!  I have to say, I felt like a real BIG SHOT!  I was just a great opportunity to promote my Highland Games (that’s my real passion), but also to solicit new volunteers, sponsors, and competitors.  One of the people that approached me after the award ceremony wants to try his hand at the Highland Games!  New blood is always a good thing. 

Afterwards some friends took me to the Dukum Inn for a celebratory round of drinks and soon I was home in time to catch the evening news with a story on my.  Leave it to one of my kids to bring “Ol’ Dad” back down to earth.  After the news showed me giving my speech and talking about the award my youngest son said, “Yeah, Dad….now can we turn it back to my show”!  

So, thanks USAWA for “putting me over the top”.  I think a lot of good things will come out of this award, some new sponsorship, some new help, some new spectators, and maybe even a new competitor or two!  I am hosting the Old Time Strongman Championships again this year and the Chamber wants to help me on that one, too.   So come back to Kirksville, or come for the first time!  More USAWA events are to come! 

http://www.kirksvilledailyexpress.com/features/x1251827843/Kirksville-chamber-honors-Tate-others-for-local-service

The JWC Monster Wrist Roller

by Thom Van Vleck

LaVerne Myers, of the Dino Gym, training on the JWC Monster Wrist Roller in preparation for next month's USAWA Grip Championships.

Recently, I made a monster wrist roller out of spacers from an old disc (farm implement that would bust up clods after plowing or aerate the ground).  These spacers look like giant spindles and are about 2″ in diameter in the grip.  I put three on a 1 1/4″ bar.  The two outside ones were for grip and the inside one was to roll up the rope which was attached to a vertical bar loaded with weight.   I was so pleased with it, I made one for Al Myers who then took it and improved up on the design.  I have to admit, Al’s is now better than mine, although I made some changes to mine based on Al’s ideas.

At any rate, I have been using it lately for my grip.  I use it just like a regular wrist roller but I set in in my squat racks  so that it take the pressure off my delts and puts all the emphasis on my forearms.  I try and get really aggressive rolling the weight up and use enough weight to really challenge me.  I pretend I’m trying to squeeze water out of a rock!!!!!

Wrist rollers are a great training tool, even if you don’t have a “Monster” one like me and Al.  If you come to either the Dino Gym or the JWC Training Hall, you will have to give them a try!  Grip has always been stubborn for me to make progress so any new toy adds new excitement to my training and for now, the Monster Wrist Roller is what’s new in my grip training!

1 20 21 22 23 24 50