Teeth lift

This topic has 6 replies, 4 voices, and was last updated 10 years, 11 months ago by 61pwcc.

Viewing 6 reply threads

Author

Posts
- November 19, 2013 at 5:43 pm #20956
  KCSTRONGMAN
  Keymaster
  Teeth lift
  
  I'm the lyrical Jesse James
- November 20, 2013 at 6:01 am #20962
  61pwcc
  Participant
  I would welcome any and all help on making one. Thanks.
- December 9, 2013 at 5:34 pm #20961
  Randy Smith
  Participant
  Anybody have any suggestions about making a bit for the teeth lift?
  Based on the previous comments from Al, it sounds like folding a piece of leather over a ring, riveting it, and then gluing some additional pieces of leather to build up the part inside your mouth is what has been done. I suspect the rivets ought to be between the lifters lips and the ring.
  But if sombody can link or attach a picture or a diagram, that would be a big help.
  
  Al, or anybody else, what kind of glue?
  
  R
- December 9, 2013 at 6:08 pm #20960
  KCSTRONGMAN
  Keymaster
  I believe this weekend, Al said regular elmers
  
  I'm the lyrical Jesse James
- December 10, 2013 at 8:07 am #20959
  Al Myers
  Keymaster
  Randy, I made my first one using epoxy cement. I really think super glue would work as well.
  
  This “research project” is still in the works for me. I’ll let you know how it turns out. Al
- December 10, 2013 at 5:19 pm #20958
  Randy Smith
  Participant
  Epoxy might be effective, but it’s not the sort of stuff I want to put in my mouth. I’ll see if I can find some options as well as some time to try to get this project started.
  
  Does Steve Schmidt use anything or have any suggestions that might help us mortals?
  
  R
- December 10, 2013 at 5:40 pm #20957
  Al Myers
  Keymaster
  Randy, You gonna risk losing your teeth with the teeth lift and you’re worried about a little dried epoxy resin????? haha Al
Author

Posts

Viewing 6 reply threads

You must be logged in to reply to this topic.