Tag Archives: Chad Ullom

The One Arm Dumbbell Swing

by Al Myers

My training partner Chad Ullom and I just spent a training session training the One Arm Dumbbell Swing. This is a lift not well understood today, but at one time was a very popular lift among old time strongmen. One arm lifts were once trained as much as two arm lifts – but not anymore. The USAWA rules for the One Arm Dumbell Swing are quite simple – but certain things must be done for a Dumbbell Swing to be “legal”. These include:

– once the dumbbell leaves the platform it must be in continual motion until lockout

– the rod of the dumbbell must maintain a 90 degree angle to the body

– the non-lifting hand must not touch the lifting arm or dumbbell

– the arm must be straight in receiving the dumbbell overhead – in other words – NO PRESS OUT

– the lift ends on command once the feet are in line and the dumbbell is in control overhead

Al Myers with a 145 pound Dumbbell Swing.

There are two styles that are used the most when doing an One Arm Dumbbell Swing. I use the more traditional style of “swinging” the dumbbell between my legs once to gain momentum to propel it overhead. Chad uses a “snatch style” where he takes it from the floor overhead in one motion and drops under the dumbbell when he catches it overhead. This is difficult in the sense that the hand is turned different than a Dumbbell Snatch. The USAWA Rules allow the lifting arm to bend during the lift and the feet to move.

Top Ten All-Time USAWA One Arm Dumbbell Swings


1. 143 Pounds Chad Ullom
2.
 140 Pounds Mike McBride
140 Pounds Frank Ciavattone
4. 121 Pounds Al Myers
5. 120 Pounds Ed Schock
120 Pounds Jim Goviannini
120 Pounds Abe Smith
120 Pounds Robert English
9. 115 Pounds Scott Schmidt
115 Pounds Jason Weigle

Coming Soon – The Top Ten One Arm Dumbbell Swings of All-Time.

Will any of these USAWA lifters make the list?

Quiz of the Week

by Al Myers

Name this USAWA Lift and who it is named after. Also, name the USAWA lifter that has lifted the most weight in this lift in an USAWA event.

Step 1 - Lift the bar behind the back

Step 2 - Roll the bar up the back onto the shoulders

Step 3 - Perform a behind the neck jerk

Winner receives an USAWA patch

Rules: First correct answer to webmaster wins, and only one answer may be given per day.

Congratulations to Chad Ullom of Topeka, Kansas for correctly identifying this lift as the Arthur Lift, named after the great old-time German strongman Arthur Saxon (and demonstrated by him in these photos). This lift requires great shoulder flexibility. The bar starts on the platform behind the lifter, and is raised behind the back until the bar is positioned above the hips (or above the belt). At this point, the lifter bends forward, and in a series of steps rolls the bar up the back until it is fixed across the shoulders. The hands are allowed to come free of the bar during this. The lifter then stands and performs a behind the neck jerk, at which time the lift is completed. Saxon is reported to have done 386 pounds in this lift, as it was witnessed by Warren Lincoln Travis. This lift was introduced to the USAWA by Art Montini – so in a way it is named after two Arthurs. The top weight ever lifted in the Arthur Lift in the USAWA was done by Chad Ullom, who lifted 297 pounds at the 2007 National Championships.

Chad Ullom performing the Arthur Lift at the 2007 National Championships

1 … 16 17 18